Sportage 4WD 2Dr L4-2.0L (2002)
Throttle Position Sensor: Service and Repair
Removal
NOTE: The throttle position sensor is not adjustable or replaceable. The throttle position sensor is part of the throttle body assembly.
For further instructions, refer to Throttle Body.
Removal
1. Check that the ignition key is in the OFF position.
2. Disconnect the throttle position sensor connector.
3. Remove the two bolts holding the throttle position sensor to the throttle body.
Installation
1. Position the throttle position sensor on the throttle body.
2. Install and tighten the two bolts.
3. Connect the throttle position sensor electrical connector.
