Sportage 4WD 2Dr L4-2.0L (2002)
8. Verify that the green POWER indicator on the deployment tool is illuminated.
9. Depress and hold the READY button (button number 1).
10. Verify that the yellow READY indicator is flashing.
11. Depress and hold the DEPLOY button (button number 2).
12. Verify that the Air Bag module has deployed. If not, verify that the red DEPLOY indicator is illuminated.
13. Release both the READY and DEPLOY buttons.
14. Verify that both the READY and DEPLOY indicators are no longer illuminated.
15. If the air bag successfully deployed, allow a minimum of twenty minutes for the bag to cool before handling. Monitor the bag throughout the
cool-down period to ensure that the hot components do not start a fire.
16. If the air bag did not deploy, keep the area around the deployment site clear of personnel for a minimum of 30 minutes.
17. Disconnect the power leads from the battery.
18. Remove the air bag from the stack of tires carefully, wearing rubber gloves and eye/face protection to protect yourself from possible chemical
exposure.
19. Dispose of the complete air bag assembly. No part of the air bag may be reused. Place the air bag into a sturdy plastic bag and seal securely.
Dispose of the deployed air bag according to federal, state and local laws and regulations including, but not limited to, EPA and OSHA
regulations.
20. Install battery.
