Sportage 4WD 2Dr L4-2.0L (2002)
1. Compress and expand the shock absorber three to four times and analyze for uniform working force and abnormal noise.
2. Inspect for oil leakage.
3. Inspect the shock absorber for a worn or deteriorated rubber bushing.
4. Replace the rear shock absorber assembly if a problem is found.
5. Inspect the rear coil spring for bends, cracks or other damage.
6. Inspect the upper and lower rear spring rubber seats for tears and/or deterioration.
7. Inspect the rear jounce stop for damage and/or deterioration.
8. Replace if damaged, deformed or cracked; replace bushings if worn or deteriorated.
Installation
1. Install and hand-tighten the rear jounce stop to the body.