Sportage 4WD 2Dr L4-2.0L (2002)
8. Attach both shock absorbers and tighten bolts.
Tighten panhard bar, trailing links and shock absorber mounting bolts to 66 ft. lbs. (90 Nm).
9. Place brake assemblies in mounting position.
10. Install nuts.
Tighten nuts to 74 ft. lbs. (100 Nm).
11. Install breather.
12. Using a line wrench, attach brake line to both brake assemblies.
13. Attach emergency brake cable restraining strap to chassis
14. Install both axles.
15. Using a line wrench, attach brake line to rear axle housing splitter block.
16. Install ABS sensor.
17. Align reference marks and install driveshaft.
18. Fill differential with oil to the bottom of the filler hole.
Oil capacity: 1.6 quarts (1.5 Liters)
Oil specification above 0°F (-18°C): API GL-5, SAE 90
Oil specification below 0°F (-18°C): API GL-5, SAE 80
19. Install the filler plug with a new washer.
Tighten filler plug to 2.7 ft. lbs. (36 Nm).
20. Bleed the brake system
