Sportage 4WD 2Dr L4-2.0L (2002)
Drive/Propeller Shaft: Service and Repair
Driveshaft Deflection
DRIVESHAFT DEFLECTION
1. Place transmission in neutral.
2. Raise and support vehicle.
3. Install a dial indicator to the vehicle undercarriage and place the indicator plunger on the driveshaft.
4. Measure both shafts in three separate locations: At the center and 3 inch (76.2 mm) from each yoke weld. Slowly turn one of the wheels to turn
the driveshaft and record the highest indicator reading in all three locations.
Removal
1. Raise and support vehicle.
2. Place index marks (reference marks) on the driveshafts and their matching transfer case and differential input/output shafts.
3. Remove four nuts holding universal flange to transfer case.
4. Remove four nuts holding universal flange to differential.
5. Remove driveshaft.
6. Inspect driveshaft for dents or other damage. If shaft appears damaged, replace it.
