Sportage 4WD 2Dr L4-2.0L (2002)
thickness.
Starting torque: 2.6 - 8.7 inch lbs. (0.29 - 0.98 Nm)
Installation
1. Align index marks on the driveshaft.
2. Connect front driveshaft flange to companion flange on transfer.
a) Align index marks on the flange and connect the flanges with four bolts and nuts.
b) Tighten the bolts and nuts.
Tightening torque: 36 - 43 ft. lbs. (49 - 59 Nm)
3. Connect driveshaft flange to companion flange on front differential
a) Align index marks on the flange and connect the flanges with four bolts and nuts.