Sportage EX 2WD L4-2.0L (1997)
Camshaft: Testing and Inspection
1. Set the front and rear journals on V-blocks. Check the camshaft runout. Replace if necessary.
Runout: 0.0012 inch (0.03 mm) max.
2. Check the cam for wear or damage. Replace if necessary.
3. Check the cam lobe height at the two points as shown in the figure.
Height: 1.7737 inch (45.052 mm).
Minimum: 1.7658 inch (44.852 mm).
4. Measure wear of the journals in X and Y directions at the two points as shown in the figure.
Diameter: 1.1787-1.1797 inch (29.940-29.965 mm).
Out-of-round: 0.002 inch (0.05 mm).
