Sportage EX 2WD L4-2.0L (1997)
Drive Belt: Specifications
Drive Belts
DEFLECTION
Generator
NEW ..................................................................................................................................................................................... 0.24-0.31 inch (6-8 mm)
USED .................................................................................................................................................................................... 0.27-0.35 inch (7-9 mm)
P/S
NEW ................................................................................................................................................................................... 0.31-0.39 inch (8-10 mm)
USED .................................................................................................................................................................................. 0.35-0.43 inch (9-11 mm)
A/C
NEW ..................................................................................................................................................................................... 0.27-0.35 inch (7-9 mm)
USED .................................................................................................................................................................................. 0.31-0.39 inch (8-10 mm)
NOTE:
-
A belt is considered NEW if it has been used on a running engine for less than five minutes.
-
Check the drive belt deflection by applying moderate pressure (22 lb [98 N]) midway between the pulleys.
