Sportage EX 2WD L4-2.0L (1997)
8.
Remove (and keep) the five (5) bolts (one on the top and two on each side) attaching the radiator cowling to the radiator.
9.
Remove (and keep) the four (4) cooling fan mounting nuts then remove the cooling fan.
10.
Remove the radiator cowling.
11.
Install the new radiator cowling. Align the upper mounting bolt hole with the fresh air duct mounting hole.
12.
Secure the new radiator cowling to the radiator housing using four (4) existing bolts.
* NOTICE
Do not install the radiator cowling upper mounting bolt. The upper mounting location has been changed. The upper mounting bolt now retains
both the radiator cowling and the fresh air duct.
