Sportage EX 2WD L4-2.0L (1997)
Exhaust Pipe: Service and Repair
Tail Pipe
WARNING: A hot exhaust system can produce a serious burn.
REMOVAL
1. Remove the tail pipe from its support.
2. Remove two nuts at the tail pipe flange.
3. Remove the tail pipe.
4. Remove the gasket.
INSTALLATION
1. Clean mating surfaces as required.
2. Install a new gasket on the muffler flange.
3. Lubricate the inside of the tail pipe hanger.
4. Hang the muffler from the tail pipe hanger.
5. Install the tail pipe flange at the rear muffler flange.
6. Install two nuts at the rear of the tail pipe flange. Tighten these two nuts to 70 ft. lbs. (100 Nm).