Sportage EX 2WD L4-2.0L (1997)
12. Remove the heater core from the unit assembly.
ASSEMBLY
1. Insert the heater core assembly into the heater unit assembly.
2. Attach the core tube mounting bracket to the housing with four screws.
Tighten the four screws to 53 lb-in (6 N.m).
3. Assemble the heater unit assembly around the heater core.
4. Attach the six retaining clips to keep the heater core housing assembled.
5. Assemble the three sections of the heater unit together.
6. Attach eight retaining clips to hold the sections together.
