Sportage EX 2WD L4-2.0L (1997)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. Disconnect the cable from the battery negative terminal.
2. Raise the vehicle and support it with safety stands.
3. Disconnect the crankshaft position sensor connector.
4. Remove one bolt and pull the sensor straight out of the transmission housing.
INSTALLATION
1. Reinstall the crankshaft position sensor into the transmission with the bolt.
Tightening torque: 60 inch lbs. (7 Nm).
2. Reconnect the crankshaft position sensor connector.
3. Lower the vehicle.
4. Reconnect the cable to the negative battery terminal.
