Sportage EX 2WD L4-2.0L (1997)
Installation
1. Reinstall the Fuel Tank Pressure Sensor to the fuel tank sending unit.
2. Reinstall the retainer nut.
3. Reinstall the Fuel Tank Pressure Sensor connector.
4. Reattach the Fuel Tank Pressure Sensor ground wire to the fuel tank sending unit mounting plate with the previously removed screw.
5. Reinstall the fuel pump access cover.
6. Reinstall the four (4) fuel pump access cover screws with the ground wire.
7. Position the carpet flap over the fuel pump access cover.
8. Lower the rear seat to the horizontal position.