Sportage EX 2WD L4-2.0L (1997)
Electronic Brake Control Module: Service and Repair
REMOVAL
1. Disconnect the negative battery cable.
2. Disconnect the ABS control unit harness connector.
3. Remove the trim panel pad around the steering console.
Under Instrument Panel Above Pedal Assy
4. Remove the three mounting screws.
5. Remove the ABS control unit from dash.
INSTALLATION
1. Position ABS control unit in dashboard.
2. Insert and tighten the three mounting screws.
3. Replace the trim pad.
4. Connect ABS control unit harness connector.
5. Connect negative battery cable.
