Sportage EX 2WD L4-2.0L (1997)
8.
Inspect the ECM cover to determine if the ECM requires replacement.
* NOTICE
The colored dots may be located anywhere on the ECM cover.
A.
If the ECM requires replacement, proceed to "Engine Control Module (ECM) Replacement Procedure 'shown in this Bulletin.
B.
If the ECM does not require replacement, attach a SC005 Campaign Completion Label to the upper right corner of the ECM, then proceed
to "Engine Control Module (ECM) Replacement Procedure" step 10 in this Bulletin.
Replacement