Sportage EX 2WD L4-2.0L (1997)
4. Install pitman arm on center link and install nut.
Tighten nut to 36 ft. lbs. (49 Nm).
5. Install cotter pin through nut at center link.
6. Engage intermediate shaft to steering gear shaft.
7. Install set bolt in intermediate shaft.
Tighten set bolt to 25 ft. lbs. (34 Nm).
8. Connect damping pipe to pressure hose.
Tighten to 29 ft. lbs. (39 Nm).
9. Connect suction hose No. 1 to pipe assembly No. 1.
10. Lower vehicle for access to top of steering gear.
11. Install pipe assembly No. 4 on top of steering gear.
Tighten to 29 ft. lbs. (39 Nm).
