Sportage EX 2WD L4-2.0L (1997)
12. Connect damping pipe to top of steering gear.
13. Install return hose No. 1 on pipe assembly No. 1.
14. Place reserve tank in position over bracket and press down until engagement of the detent is felt. Refer to Reserve Tank and Bracket" in this
section.
15. Install coolant recovery tank.
16. Install under cover with four bolts.
Tighten bolts to 18 ft. lbs. (25 Nm).
NOTICE: Do not operate the engine before adding power steering fluid as required to fill the system. Operation of the power steering pump with
inadequate fluid will result in damage to the pump.
17. Bleed air from the system.