Sportage EX 2WD L4-2.0L (1997)
1. Remove the snap ring from the end of the sun gear shaft.
2. Pull the center support assembly out from the planetary sun gear.
3. Apply 58 - 116 psi (10.4-20.7 kg/cm2) air pressure into the fluid hole at the extreme left of the center support assembly and measure movement of
the second coast brake piston.
Second coast brake piston stroke: 0.025 - 0.068 inch (0.63 - 1.73 mm)
NOTICE: If the measured value is not within the standard range, replace the clutch plates or discs.