Sportage EX 2WD L4-2.0L (1997)
8. Using SST K95B-4200 AT3 and hydraulic press compress the second brake piston return springs.
NOTICE: Be careful when applying pressure. Too much pressure will cause the plate section of the brake piston return spring seat to deform.
9. Install the snap ring.
NOTICE: When installing the snap ring, do not align the lug of the retainer with the opening in the snap ring.
10. Install the second brake clutch plates and discs (alternating), and the retainer plate. Then install the retaining ring.
NOTICE: Insure that the gap in the retaining ring is not aligned with any of the center support cut-outs.
NOTICE: Install retainer plate with its chamfered side facing brake discs.