Sportage EX 2WD L4-2.0L (1997)
4. Loosely install the front valve end cover with one bolt. Install the secondary regulator valve spring and secondary regulator valve. While holding
the secondary regulator valve as shown, slide the cover in place and install the second front valve end cover bolt.
Tightening torque: 44 - 51 inch lbs. (5 - 6 Nm)
CAUTION: When installing the cover, be sure to hold the valve with your finger to prevent the secondary regulator valve and spring from
jumping out.
5. Install the cut back valve spring, cut back valve, and cut back valve plug.
6. Using a screwdriver with vinyl tape or something similar wound around its tip, hold the cut back valve plug and install the cut back retainer.
7. Install the throttle valve retainer plate.
