Sportage EX 2WD L4-2.0L (1997)
Drive/Propeller Shaft: Service and Repair
GENERAL INFORMATION
If noise or vibration is present in the vehicle drive line, the drive shaft may be out of round due to damage. This inspection will help determine if the
drive shaft and its attaching drive line components are "true" or turning with an absolute minimum amount of lateral movement.
1. Place transmission in neutral.
2. Raise and suitably support vehicle.
3. Install a dial indicator to the vehicle undercarriage and place the indicator plunger on the drive shaft.
4. Measure both shafts in three separate locations: At the center and 3 inches (76.2 mm) from each yoke weld. Slowly turn one of the wheels to turn
the drive shaft and record the highest indicator reading in all three locations.
REMOVAL
1. Raise and suitably support vehicle.
2. Place suitable index marks (reference marks) on the drive shafts and their matching transfer case and differential input/output shafts.
3. Remove four nuts holding universal flange to transfer case.