Sportage EX 2WD L4-2.0L (1997)
15.
Reconnect the outside mirror electrical connector then reinstall the mirror to the door using the three (3) existing screws.
16.
Re-install the door trim.
17.
Cycle the window up and down several times to ensure smooth/proper operation.
Rear Door
1.
Remove (and keep) the rear door inside pull handle screw cover and screw, then remove the inside pull handle.
2.
Remove (and keep) the inside door handle retaining screw.
3.
Carefully release the rear door trim panel retaining clips from the rear door, then lift the door trim panel straight up to release the panel lip from
between the door frame and the inner door glass weatherstrip.
NOTICE
Do not remove the inner door glass weatherstrip at this time.
