Sportage EX 2WD L4-2.0L (1997)
20.
Re-install the plastic vapor barrier in its original position on the rear door.
NOTICE
Ensure that the plastic vapor barrier is positioned correctly on the rear door.
21.
Slip the inside door handle through the rear door trim panel, then reconnect the power window switch harness connector to the power window
switch.
22.
Align the door lock knob with the opening in the rear door trim panel and slide the door panel down onto the rear door.
NOTICE
Ensure that the rear door trim panel is positioned correctly on the rear door, then press down along the edge of the door trim panel to re-install
the retaining clips into the rear door.
23.
Re-install the retaining screws into the inside door handle and the inside pull handle, then re-install the inside pull handle screw cover.
24.
Re-install the inner door glass weatherstrip by aligning the notch in the weatherstrip with the rear door glass run channel. Beginning at the front
edge of the door, press down evenly on the weatherstrip until it is correctly positioned on the rear door.
25.
Verify the operation of the rear door lock using both the inside and outside door handles.
