Sportage EX 2WD L4-2.0L (1997)
10.
Insert the top rear corner of the door glass run into the window frame and push the rear edge into place.
NOTICE
Make sure the upper rear corner is fully seated in the door window frame.
11.
Raise the window half-way. Squeeze the door glass run together then slide it down into the door glass guide groove.
NOTICE
Spray the lower forward section of the door glass run with silicone spray to aid in the installation.
12.
Push the door glass run down until the inside flap contacts the inside lower portion of the window frame.
13.
Press the front and top portions of the door glass run into place in the door window frame.
14.
Inspect the inside and outside edges of the door glass run to confirm that it is fully seated along the entire length of the door frame.
