Sportage EX 2WD L4-2.0L (1997)
11.
Remove the entire door glass run by pulling the ends out of the front and rear door glass guides.
12.
Slide the rear section of the new door glass run into the rear glass guide and down until the inside flap contacts the inside lower portion of the
window frame. Continue installing the door glass run up to the top rear corner of the window frame.
13.
Pull the center channel and quarter window up and back, fitting the quarter window into the new door glass run.
14.
Re-install and tighten the center channel upper mounting screw and lower mounting bolt.
15.
Squeeze the lower end of the door glass run together, then slide the forward end down into the door glass guide.
NOTICE
Spray the lower front section of the door glass run with silicone spray to aid in the installation.
16.
Slide the door glass run down until the end of the inner flap contacts the lower portion of the door window frame.
17.
Beginning at the bottom of the door glass run, push the forward edge of the door glass run into the door window frame groove.
18.
Push the forward corner and top section into place in the door window frame.
19.
Cycle the window up and down several times to ensure smooth/proper operation.
