300Tdi Engine: Introduction
INTRODUCTION
INTRODUCTION
1
INTRODUCTION
How to use this manual
To assist in the use of this manual the section title is
given at the top and the relevant sub-section is given
at the bottom each page.
This manual contains procedures for overhaul of the
engine. For all other information regarding
adjustments, removal of oil seals and engine,
consult the Repair Manual for the model concerned.
This manual is divided into 3 sections:
•
Description and Operation,
•
Overhaul and
•
Data, Torque & Tools.
To assist filing of revised information, each
sub-section is numbered from page 1.
Individual items are to be overhauled in the
sequence in which they appear in this Manual. Items
numbered in the illustrations are referred to in the
text.
Overhaul operations include reference to Service
Tool numbers and the associated illustration depicts
the tool. Where usage is not obvious the tool is
shown in use. Operations also include reference to
wear limits, relevant data, torque figures, specialist
information and useful assembly details.
WARNINGS, CAUTIONS and Notes have the
following meanings:
WARNING: Procedures which must be
followed precisely to avoid the possibility
of injury.
CAUTION: Calls attention to procedures
which must be followed to avoid damage
to components.
NOTE: Gives helpful information.
References
With the engine and gearbox assembly removed,
the crankshaft pulley end of the engine is referred to
as the front.
Operations covered in this manual do not include
reference to testing the vehicle after repair. It is
essential that work is inspected and tested after
completion and if necessary a road test of the
vehicle is carried out particularly where safety
related items are concerned
Dimensions
The dimensions quoted are to design engineering
specification with Service limits where applicable.
