Defender 110 (LD) V8-3.9L (1993)
/v8-3.9l/Page-1104001.png)
Power Steering Pump: Service and Repair
Pulley Replacement
Power Steering Pump Pulley
1. Disconnect battery negative lead.
2. Remove drive belt.
3. Position container to collect any fluid spillage.
4. Using an Allen key to restrain power steering pump pulley, remove 3 bolts (4) securing pulley (5) to pump.
5. Remove power steering pump pulley.
6. Reverse procedure to install, noting the following:
a. Use suitable thread locker on pulley bolts.
b. Tighten bolts to: 10 Nm (7 ft. lbs.).
