Defender 110 (LD) V8-3.9L (1993)
Axle Shaft: Service and Repair
Stub Shaft Pilot Bearing and Seal - Defender 110/130
Removal
1. Remove hub assembly.
2. Remove 6 bolts securing stub axle to axle casing. Remove mudshield.
3. Remove stub shaft and gasket.
4. Remove axle shaft from axle case.
5. Remove and discard oil seal.
Installation
1. Lubricate replacement seal with EP90 oil. Fit seal, lip side trailing using tool LRT-51-004. Drive seal intohousing until it is flush with rear face of
stub shaft.