Defender 110 (LD) V8-3.9L (1993)
Axle Nut: Specifications
Rear Suspension
Specifications and Procedure
1. Install hub adjusting nut. Tighten to 50 Nm (37 ft. lbs.). Ensure hub is free to rotate with no bearing play.
2. Back off adjusting nut 90° and tighten to 10 Nm (84 inch lbs.) This will give the required hub end float of 0.010 mm, (0.0004 inch).
3. Install a new lock washer.
4. Install locknut. Tighten to 50 Nm (37 ft. lbs.).