Defender 90 (LD) V8-4.0L (1997)
Front Door Interior Handle: Service and Repair
Remote Control Lever - Front Door
Remove
1. Remove door trim. See: Front Door Panel/Service and Repair
2. Peel back sufficient of plastic sheet to gain access to remote lever.
3. Release spring clip and disconnect control rod from latch mechanism.
4. Release control rod from plastic clip in mounting panel.
5. Remove 2 screws securing remote control lever to mounting panel and withdraw lever and control rod.
Refit
6. Feed control rod into position and loosely secure lever to mounting panel with 2 screws.
7. Connect control rod to latch mechanism and secure with spring clip.
8. Tighten control lever retaining screws.
9. Secure control rod to plastic clip in mounting panel.
10. Secure plastic sheet with adhesive.
11. Fit door trim casing.