Defender 90 (LD) V8-4.0L (1997)
Console: Service and Repair
Center Console
Service Repair No - 76.25.01
Remove
1. Open cubby box lid.
2. Remove in-car entertainment unit - if fitted.
3. Remove 6 screws securing cubby box to console.
4. Remove cubby box.
5. Release rear edge of selector housing surround.
6. Remove surround.
7. Release hi-low gear lever gaiter from console.
8. Remove hi-low gear lever knob and gaiter assembly.
9. Remove tray from console.
10. Remove screw securing front edge of console.
11. Remove 3 screws securing rear of console.
12. Remove console.
Refit
13. Fit and align console.
14. Fit and tighten screws securing console.
15. Fit tray to console.
16. Fit hi-low gear lever knob and gaiter assembly.
17. Secure hi-low gear lever gaiter to console.
18. Fit gear selector housing surround and secure.
19. Fit cubby box to console and secure with screws.
20. Fit in-car entertainment unit - if fitted.
21. Close cubby box lid.