Defender 90 (LD) V8-4.0L (1997)
/v8-4.0l/Page-1229001.png)
Radiator Support: Service and Repair
Grille Panel
Remove
1. Remove radiator grille.
2. Disconnect multiplug from condenser fan fly-lead.
3. Loosen bolts securing top panel and grille panel to fenders.
4. Remove bolts securing securing grille panel to fenders.
5. Remove grille panel.
Refit
6. Position grille panel and fit bolts to fender, finger tight.
7. Fit plastic nuts to lower fixing, each side
8. Fit screws to top panel.
9. Align grille panel and tighten all fixings.
10. Fit radiator grille.
