landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Body and Frame|Seats > < Convertible Top - Repair|Page 4864
Page 1
background image

Sunroof / Moonroof: Service and Repair

Remove

1. Open sun roof fully.
2. Disengage spring lock from operating handle catch.
3. Holding sun roof at both sides, release hinges from locating brackets at front of outer frame.

4. Remove sun roof.
5. Starting from center rear, peel headlining finisher from inner frame.
6. Remove 18 screws securing inner frame to outer frame and detach inner frame.
7. Lift outer frame from roof.

NOTE:  Assistance may be required to remove the sun roof assembly.

 
Refit

8. Clean roof area around outer frame seating.
9. Position outer frame on roof.

10. Fit inner frame to headlining and secure to outer frame with 18 screws but do not fully tighten.
11. Check alignment of inner and outer frames with root mounting and headlining, adjust as necessary, and fully tighten fixing screws to 10 Nm, 7 lbf

ft.

12. Starting from center rear, fit headlining finisher lip into locating channel of inner frame.
13. Press finisher firmly over inner frame and continue around complete frame, ensuring finisher lies flat on headlining.
14. Fit sun roof hinges fully into locating brackets on outer frame, and lower the glass panel.
15. Engage operating handle catch with spring lock of outer frame and close sunroof.

Body and Frame|Seats > < Convertible Top - Repair|Page 4864