Defender 90 (LD) V8-4.0L (1997)
8. Install spacing washer.
9. Install hub adjusting nut. Tighten to 50 Nm (37 ft. lbs.) ensure hub is free to rotate with no bearing play. Back off adjusting nut 90° and tighten to
10 Nm (84 inch lbs.).
10. Install a NEW lock washer.
11. Install locknut. Tighten to 61 Nm (45 ft. lbs.).
12. Tab over lock washer to secure adjusting nut and locknut.
13. Using a NEW joint washer, install axle shaft to hub. Tighten bolts to 65 Nm (48 ft. lbs.).
14. Install brake caliper. Tighten bolts to 82 Nm (60 ft. lbs.). Secure brake pipes to axle casing.
15. Install road wheel, remove axle stands and tighten road wheel nuts to 130 Nm (95 ft. lbs.).
16. Operate footbrake to locate brake pads before driving vehicle.