Defender 90 (LD) V8-4.0L (1997)
Tie Rod: Service and Repair
Tie Rod End
Service Repair No - 57.55.07
Removal
1. Park vehicle on level ground and chock rear wheels.
2. Raise vehicle and locate axle stands or use a ramp.
3. Centralise steering.
4. Unscrew 2 bolts and remove tie rod protection bracket from axle differential housing.
5. Remove split pin and castellated nuts securing tie rod to swivel housing arms.
6. Disconnect tie rod ends using LRT-57-018.
7. Remove tie rod.
8. Slacken clamp bolts.
9. Unscrew tie rod ends.
Installation