Defender 90 (LD) V8-4.0L (1997)
15. Drift out inner and outer bearing tracks.
16. Clean hub and drift in inner and outer bearing tracks.
17. Pack hub inner bearing with recommended grease and install to hub.
Installation
1. With lip side leading install new seal to hub using special tool LRT-54-003 seal replacer and drift LRT-99-003. Drive in seal flush with rear face
of hub. Apply grease between seal lips.
2. Install brake disc to hub, lining up to marks made during dismantling. Apply sealant, Part No. STC 50552 to threads of retaining bolts and install
retaining bolts. Tighten to 73 Nm (55 ft. lbs.).
3. Grease and install outer bearing to hub.
4. Install hub assembly.