landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Pilot Bearing > < Clutch Pipe/Master Cylinder - Joint Revision
Page 1
background image

Hydraulic Hose: Technical Service Bulletins
Clutch Pipe/Master Cylinder - Joint Revision

13/1/95

33/01/95/US

SUBJECT:
Clutch Pipe Joint To Master Cylinder

MODEL:
Defender

AFFECTED VEHICLES:
Defender derivatives from LD 939976 to LD 941636

DETAIL

A number of vehicles have been built which have revised clutch pipes (ANR 2162 and ANR 2945) and have a master Cylinder adaptor (512650). The
clutch pipes were manufactured with a single flared joint (male) instead of double flare (female), and to ensure compatibility of the pipes to the adaptor,
the adaptor was modified to accept the single flare.

Where instances of pipe or adaptor replacement is required BOTH COMPONENTS must be Changed as the original parts are not available through the
parts system.

ACTION REQUIRED

For information only.

PARTS INFORMATION

Refer to parts microfiche or manual to identify individual components.

PROCEDURE

Refer to the workshop manual section 33 for full repair instructions.

WARRANTY

Normal warranty policy and procedures apply.

COMP. CODE: Not applicable

SRO: Refer to individual Service Repair Operation Times.

Pilot Bearing > < Clutch Pipe/Master Cylinder - Joint Revision