Defender 90 (LD) V8-4.0L (1997)
Wheel Bearing: Service and Repair
Rear Suspension
Wheel Bearing and Wheel Hub - Vehicles Built Up To: 01/1999
90/110/130 Axles
Service Repair No - 64.15.14
Removal
1. Raise rear of vehicle and support rear axle onto axle stands. Remove appropriate road wheel.
2. Release brake hose clips arid remove brake caliper bolts. Secure caliper to one side.
WARNING: Take care not to kink brake hose.
3. Remove 5 bolts and withdraw axle shaft.
4. Remove and discard joint washer.
5. Bend back lock washer tabs.
6. Remove locknut and lock washer. Discard lock washer.
7. Remove hub adjusting nut.
8. Remove spacing washer.
9. Remove hub and brake disc assembly complete with bearings.
10. Mark, for reassembly, position of hub to brake disc.