TD5 Defender
70
BRAKES
2
REPAIR
SENSOR - ABS - FRONT WHEEL
Service repair no - 70.65.30
Remove
1. Raise vehicle on a 2 post ramp.
2. Carefully prize ABS sensor from front hub.
3. Release clip securing ABS sensor harness to
brake pipe.
4. Release clip securing ABS sensor harness to
inner wing.
5. Lower vehicle.
6. Release second clip securing ABS harness to
inner wing.
7. Disconnect sensor harness multiplug.
8. Remove sensor and harness.
Refit
9. Connect sensor harness multiplug.
10. Position sensor harness and secure to inner
wing with clip.
11. Raise vehicle.
12. Secure harness to inner wing and brake pipe
with clips.
13. Apply grease to sensor.
14. Carefully fit sensor to hub assembly.
15. Lower vehicle.
