TD5 Defender
TRANSFER GEARBOX
3
REPAIR
25. Remove retaining clip at lower end of pivot arm
and disconnect differential lock control operating
rod.
26. Remove 4 central bolts from transfer gearbox
bottom cover, position support plate LRT-99-010
to transfer gearbox and tighten bolts.
27. Position gearbox support jack and secure
support plate to jack using 4 bolts.
28. Support the weight of the transfer gearbox.
29. Remove 4 nuts securing LH and RH mountings
to chassis and transfer gearbox mounting
brackets.
30. Remove 8 bolts securing mounting brackets to
transfer gearbox, raise gearbox and remove both
mountings, heat shield from LH mounting and
brackets.
31. Disconnect multiplug from speed sensor and
release harness from clip on transfer gearbox.
