Discovery II
BRAKES
REPAIRS
70-37
Switch - brake light
$% 70.35.42
The brake switch is set automatically during fitment.
If the setting is disturbed, the switch can be reset by
depressing the brake pedal and pulling the plunger
out of the switch body, until it contacts the pedal.
Remove
1. Remove 3 fasteners and move drivers side
lower closing panel aside.
2. Disconnect multiplug from brake light switch.
3. Remove brake light switch from pedal bracket.
Refit
1. Engage switch fully into pedal bracket location
and connect multiplug.
2. Position lower closing panel and secure with
fasteners.
