Discovery I (LJ) V8-3.9L (1994)
Liftgate Window Glass: Service and Repair
Rear Door Glass
Service Repair No - 76.31.21
Remove
1. Remove the spare wheel from the rear door.
2. Remove the rear door wiper arm.
3. If the glass is fitted, disconnect the heater leads from the terminals, push out the glass and remove the mounting rubber.
Refit
4. Thoroughly clean the opening to be glazed.
5. Clean the glass and fit the mounting rubber, ensuring that the glass sits correctly in the groove.
6. Fit a draw cord around the exterior of the mounting rubber with the tails of the cord situated on the top corner of the bend at the bottom of the
glass.
7. To aid assembly, coat the glass opening in the door with liquid soap.
8. Position the assembled glass and rubber mounting to the opening, with the tails of the draw cord fed into the interior of the vehicle.
9. With assistance from a second operator, pushing the glass and mounting rubber into the opening, pull the draw cord from the mounting rubber
enabling the seal to ride up over the retaining flange.
10. Connect the heater leads to the terminals on the glass.