landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

ABS Light Relay > < Gear Sensor/Switch, Transfer Case|Locations
Page 1
background image

ABS Light: Description and Operation

OPERATION 

The warning light will be on during the self check (1.3-2 secs). If no faults are recorded the ABS warning light will switch off for half a second
then comes on again. It will remain on until the vehicle is driven faster than 7 kph (5 mph). This is the only time the light will be on without
indicating a problem. 

Any faults detected by the ABS electronic control unit (ABS ECU) will cause the warning light to illuminate indicating that the vehicle may not
have full ABS control.

ABS Light Relay > < Gear Sensor/Switch, Transfer Case|Locations