Discovery I (LJ) V8-3.9L (1994)
/v8-3.9l/Page-1601001.png)
Brake Pad: Service and Repair
Rear
REMOVE
1. Remove rear road wheels.
2. Disconnect the battery negative lead.
3. Clean exterior of calipers.
Rear Brake Caliper & Pads
4. Remove pad retaining pins and springs.
5. Remove brake pads.
6. Clean exposed parts of pistons, using new brake fluid. Wipe away excess with a lint free cloth.
7. Using piston clamp LRT-7O-5OO or equivalent, press each piston back into its bore. Ensure that displaced brake fluid does not overflow from
reservoir.
REFIT
1. Insert brake pads.
2. Position pad retaining springs, fit new pins and spread ends.
3. Apply service brake pedal several times to locate pads.
4. Check fluid reservoir, top up if necessary, using correct grade of fluid.
