landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Customer Interest: > < Diagram Information and Instructions|Page 14771
Page 1
background image

Backup Lamp Switch: All Technical Service Bulletins
Reverse Lights - Intermittant Operation

29/07/94

37/05/94/US

SUBJECT:
Reverse Lights Intermittant Operation

MODEL:
Discovery Defender

AFFECTED VEHICLES:
All vehicles with R380 manual gearbox 
Discovery LJ081991 to LJ091591 
Defender LD939976 to LD943919

DETAIL

A number of reports have been received that have detailed intermittant operation of reverse lights when reverse gear is selected. Investigation by factory
engineers has identified a tolerance issue that had arisen during gearbox build. This concern has now been addressed at point of manufacture by a design
change to the gearbox quadrant on the Defender and gearbox yoke on the Discovery. A service fix, as detailed following, has been developed for
vehicles in use.

ACTION REQUIRED

Upon customer complaint of reverse lights remaining on or intermittant operation, remove and discard the washer from behind the reverse light switch, if
reverse lights still remain on due to a faulty switch, renew the switch. Please submit a Product Report providing full vehicle details.

PARTS INFORMATION

CDU 51 Reverse light switch

PROCEDURE

Refer to Technical Information Bulletin 37/01/94 (page 7 step 10) for reverse light switch removal instructions.

WARRANTY
Normal warranty policy and procedures apply.

COMP. CODE: 7H1A

SRO
All manual gearbox models:
37.27.01 Replace switch or remove washer 00.35 hour

Customer Interest: > < Diagram Information and Instructions|Page 14771