Discovery I (LJ) V8-4.0L (1996)
Shift Interlock Solenoid: Service and Repair
Interlock Solenoid
Remove
1. Disconnect battery negative lead.
2. Remove gear selector head and illumination panel.
3. Disconnect electrical multiplug.
4. Remove screws and lift gear selector mechanism above housing.
5. Remove screws from microswitch support bracket.
6. Remove screws and separate side cover from housing.
7. Disconnect wiring solenoid to multiplug.
6. Remove circlip and retainer plate.
9. Remove clip and center sleeve.
10. Refit clip into groove on spindle and lever against it to remove solenoid from housing.
Refit
11. Fit solenoid with wiring positioned into side cover recess.
12. Fit sleeve and new clip.
13. Fit retaining plate and circlip.
14. Connect wiring to multiplug.