Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-434002.png)
11. Release clips securing coolant hoses to throttle body and disconnect hoses.
12. Disconnect brake servo vacuum pipe from inlet plenum.
13. Disconnect breather hose from inlet plenum.
14. Remove bolt securing coolant rails.
15. Release engine harness from bulkhead clips and position aside.
16. Remove 4 bolts securing ignition coils and position ignition coils aside.
17. Release plug leads from upper manifold clips.
18. Disconnect multiplug from IACV.
19. Release and disconnect IACV hose.
