Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-1279003.png)
^
Follow the on-screen instructions and select "Diagnostic System".
^
Follow the on-screen instructions, select "Fault Code Diagnostics" and clear all faults found from the ACE system ECU.
^
Follow the on-screen instructions and select "Vehicle Maintenance".
^
Follow the on-screen instructions and select "Calibrate Accelerometers".
^
Calibrate Accelerometers.
^
Follow the on-screen instructions and select "Real Time Display".
^
Follow the on-screen instructions and select "Lateral Accelerometers".
^
Confirm that the real time display values are within -0.05G to +0.05G.
2.
Return to the Diagnostic System screen and disconnect TestBook/T4 from the vehicle.
3.
Refer to RAVE section 76.67.26 and install the front stowage pocket.
