Discovery II (LT) V8-4.0L (2002)
Transfer Case Actuator: Service and Repair
Solenoid - Interlock - Up To 03 MY
Service repair No - 41.20.63
Remove
1. Raise vehicle on ramp.
2. Disconnect multiplug from interlock solenoid.
3. Release multiplug retainer from mounting plate on transfer box.
4. Remove 4 bolts securing solenoid cover, remove cover and Belleville washer.
5. Remove solenoid.
Refit
1. Clean solenoid cover and mating face.
2. Position solenoid in main casing.
3. Apply sealant, Part No. STC 3254 to solenoid cover.
4. Fit cover and Belleville washer.
5. Fit bolts securing interlock solenoid and tighten to 10 Nm (7 lbf.ft).
6. Connect and secure multiplug.
7. Lower vehicle on ramp.