landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Wipers/Washers - Front Washer Nozzles Leak Fluid|Page 6923 > < Windshield Moulding / Trim|Service and Repair
Page 1
background image

Check Valve: All Technical Service Bulletins
Wipers/Washers - Front Washer Nozzles Leak Fluid

No:

84/02/03/NAS

Ref:
Issue:

1

Date:

04/11/03

Washer Jets Weep

AFFECTED VEHICLE RANGE:

Discovery Series II (LT)

Up to 3A777039

SITUATION:

FRONT WASHER JETS LEAK

The owner may complain that the front washer jets weep and leave fluid on the hood surface. This symptom may be caused by the check valve location
being too far removed from the jet. Washer fluid trapped between the check valve and the jet can expand due to engine compartment temperatures and
weep onto the hood.

RESOLUTION:

INSTALL NEW TUBING WITH CHECK VALVE

Installation of a new tubing assembly with revised check valve location will resolve the weeping problem.

PARTS INFORMATION:

DNH500020

Washer hose assembly

Qty 1

WARRANTY CLAIMS:

84.10.89/26

Time 0.10 hrs.
Install revised washer jet tubing

FAULT CODE: N

Normal warranty policy and procedures apply. 
Material allowance is included in labor operation.

REPAIR PROCEDURE

INSTALL NEW TUBING ASSEMBLY

1.

Disconnect the washer hose assembly from the washer jets. (A and B in Figure 1)

Wipers/Washers - Front Washer Nozzles Leak Fluid|Page 6923 > < Windshield Moulding / Trim|Service and Repair